News

How to set the oil level alarm for KF57-25-3KW red

26-03-09

The oil level alarm setting scheme for KF57-25-3KW reducer is as follows: 1、 Definition of oil level safety threshold Standard oil level: After cooling down to room temperature, the oil level should be level with the centerline of the oil level plug on the side of the reducer. Alarm threshold: The low oil level alarm threshold is when the oil level is 10mm below the centerline; the high oil

READ MORE
WPEDA120-175-1: Basic model and core parameters of

26-03-09

The basic model and core parameters of WPEDA120-175-1: 800-3KW worm gear reducer are as follows: 1、 Meaning of Model Identification WPEDA: Series code for worm gear reducers, where W represents worm gear transmission, P represents planar enveloping toroidal worm gear (some manufacturers use ordinary cylindrical worm gears, which need to be confirmed with the brand), E represents secondary tran

READ MORE
What are the typical application scenarios of WPED

26-03-06

WPEDO70-120-300-0.75KW worm gear reducer is widely used in various industrial scenarios, especially suitable for equipment that requires stable transmission and high torque output at medium and low speeds. Based on its model parameters and structural characteristics, this reducer performs outstandingly in automated production lines, light industrial machinery, and general industrial equipment.

READ MORE
Technical parameters and performance characteristi

26-03-06

The technical parameters and performance characteristics of WPEDO100-155-150-2.2KW worm gear reducer are as follows: Core technical parameters Transmission type: Double stage worm gear, spatial orthogonal axis transmission Total reduction ratio: 150 (typical two-stage combination: 10 × 15, 15 × 10, etc.) Input speed: standard 1450r/min (4-pole motor) Output speed: approximately 1450 ÷

READ MORE
How to determine whether the trial operation of ZQ

26-03-05

The entire process of no-load trial operation meets the standard and is stable. After the load trial operation is completed by graded loading, there are no abnormalities in the entire process, and the core indicators meet the specifications. If there are no hidden dangers during shutdown re inspection, the trial operation can be judged as qualified; If any indicator exceeds the standard or malfunc

READ MORE
How to deal with abnormalities that occur during t

26-03-05

If any abnormalities occur during the trial operation of the ZQ250-31.5-4 gear reducer, it should be stopped immediately for troubleshooting. The root cause of the problem should be systematically diagnosed according to the principle of "from outside to inside, from simple to complex", and targeted treatment should be carried out to avoid equipment damage or safety accidents. 1、 Immediate safet

READ MORE
How to debug the overload protection device of R13

26-03-04

The debugging steps for the R137-24-45KW gearbox overload protection device are as follows: 1、 Preparation before debugging Cut off the main power supply of the equipment, hang a warning sign, conduct a power check to confirm that there is no power, and ensure safe debugging. Check the rated current on the motor nameplate (the rated current of a 45KW motor is about 85A, subject to the actua

READ MORE
How to determine whether the abnormal noise of R27

26-03-04

If the abnormal noise of R27-4.27-1.5KW gear reducer is caused by assembly accuracy deviation, it is usually accompanied by specific acoustic characteristics and operational performance. According to technical analysis, assembly accuracy deviation is one of the common causes of abnormal noise in such reducers, especially in the early stages of operation after new installation or maintenance. The f

READ MORE
What are the main components of the NGW102-18 redu

26-03-03

The main structure of NGW102-18 reducer consists of core components such as sun gear, planetary gear, inner ring gear, and planetary carrier. It belongs to the two-stage transmission series of NGW planetary gear reducer and has the characteristics of compact structure and strong load-bearing capacity. The specific composition of this type of reducer can be decomposed as follows: 1. Sun Wheel

READ MORE