News

• 
  What are the key considerations when using gear re

  26-07-29

  1、 Lubrication management First oil change: After running the new equipment for 200-300 hours, complete the first oil change and synchronously clean the internal cavity. Regular oil change: The equipment operates continuously and changes oil every 5000 hours or every year. If the daily working hours are less than 8 hours, the oil can be changed every six months. Oil control: It is strictl

  READ MORE
• 
  What are the common faults of metal gear reducers

  26-07-29

  1. Abnormal noise and vibration Metal impact sounds, persistent humming, or irregular noises during operation, accompanied by severe vibration, are often caused by gear wear and pitting, bearing damage, assembly looseness, or loose foundation bolts. 2. Overheating and Excessive Oil Temperature The temperature of the housing and bearing areas exceeds the standard, with oil temperatures per

  READ MORE
• 
  Wet weather during rainy season, moisture-proof an

  26-07-28

  1、 Core component lubrication and oil quality management Shorten oil change cycle: In humid environments, the replacement cycle of gear oil should be shortened compared to conventional environments. It is recommended to shorten it from the conventional 6000-8000 hours to 3000-4000 hours. Strictly prevent oil emulsification: Check the oil level window of the gearbox every week. If the oil is

  READ MORE
• 
  Emergency handling method for shutdown of sizing m

  26-07-28

  Step 1: Immediately shut down the machine and cut off the power to identify safety hazards. If the gearbox is found to be abnormal, stop the machine and cut off the power supply as soon as possible. It is strictly prohibited to forcefully start the machine with a fault. To prevent the expansion of faults, prevent gear cracking and component detachment from causing equipment damage and safety accid

  READ MORE
• 
  What are the requirements for ZSY gear reducers in

  26-07-27

  1. Improve the protection and sealing level of the shell For humid environments, ZSY reducers with higher protection levels (such as IP65 or above) should be prioritized to ensure excellent sealing performance and effectively prevent moisture and dampness from entering the interior. At the same time, it is necessary to ensure that the moisture-proof sealing ring and other components of the redu

  READ MORE
• 
  How to adjust the daily inspection and maintenance

  26-07-27

  1、 Daily inspection adjustment (daily/shift) Daily inspections should focus on "waterproofing, anti emulsification" and checking the basic operating status: Oil level and quality monitoring: Check the lubricating oil status daily through the oil level window. If the oil is found to be cloudy, white (emulsified), or the oil level is abnormally high, it indicates that the box may have been mix

  READ MORE
• 
  Why does ZLYJ reducer become a standard equipment

  26-07-25

  1. Strong impact resistance and high load-bearing capacity During the granulation process, especially when dealing with recycled materials, impurities may be mixed in the materials, leading to sudden changes in the load. The ZLYJ reducer adopts high-precision hard tooth surface gears. The gears and shaft parts are made of high-strength alloy steel and processed through processes such as carburi

  READ MORE
• 
  The preferred choice for small and medium-sized gr

  26-07-25

  1、 Core usage advantages 1. Hard tooth surface design, strong durability under heavy loads The granulator generates a significant impact load when extruding materials. The internal gears of K87 reducer are made of high-quality alloy steel and undergo carburizing quenching and precision gear grinding processing. The tooth surface hardness can be stably controlled within the range of 58-62HRC.

  READ MORE
• 
  How to ensure the accuracy of the planetary gearbo

  26-07-23

  1. Source control: high-precision cutting and groove processing The cutting accuracy of structural components is the source of ensuring high-precision operation and long-term reliability of the entire machine. It is recommended to use laser cutting technology to ensure smooth and even cutting with minimal deformation. At the same time, it is necessary to ensure that the bevel angle of laser cut

  READ MORE

CATEGORIES