Industry-news

• 
  What are the advantages of NGW112-110 planetary ge

  26-03-03

  The NGW112-110 planetary reducer has significant advantages in structural design, transmission performance, and applicable working conditions compared to ordinary gear reducers, especially in high load, high-precision, and space limited application scenarios. The following is a specific comparative analysis: 1、 More compact structure, smaller volume, and lighter weight NGW112-110 adopts the pr

  READ MORE
• 
  What are the common installation stiffness adjustm

  26-03-02

  The installation stiffness adjustment error of DCY180-25-1N (hard tooth surface, three-stage, vertical axis, reverse check type) gear reducer is mainly focused on six categories: foundation/base, fastening, centering, connection, box and support, and resonance, which directly leads to vibration, unbalanced load, temperature rise, tooth breakage, and bearing failure. 1、 Foundation and base stiffne

  READ MORE
• 
  How to avoid motor overload of BLD15-35-11KW cyclo

  26-03-02

  The overload problem of the BLD15-35-11KW cycloidal reducer matching motor can be effectively avoided through four core measures: optimizing selection and matching, strengthening operation monitoring, improving protection configuration, and standardizing operation and maintenance. Considering the high power of this model (11kW) and its frequent use in heavy load conditions, special attention shoul

  READ MORE
• 
  Comparative explanation of the advantages and disa

  26-02-28

  As a type of circular cylindrical worm gear reducer, CWU reducer has the advantages of compact structure, wide transmission ratio range, and strong load-bearing capacity, especially suitable for complex working conditions such as high temperature and high vibration. Compared to other types of reducers, it performs outstandingly in terms of sealing, maintenance convenience, and adaptability, but ne

  READ MORE
• 
  How to regularly check the bearing temperature of

  26-02-28

  The regular inspection of the bearing temperature of TY112-4.5-22KW reducer should be mainly carried out by infrared thermometer detection, supplemented by sensory judgment. A reasonable cycle should be set based on the operating status of the equipment, focusing on the temperature value, temperature rise amplitude, and temperature difference with other parts to ensure that the bearing operates wi

  READ MORE
• 
  What are the specific effects of humidity on the o

  26-02-27

  Humidity has a significant impact on the operation of ZQ650-31.5-5 gear reducers. In high humidity environments (relative humidity>80%), water vapor infiltration is the core cause of lubrication failure, metal corrosion, and decreased sealing performance. It can directly lead to gear wear, bearing jamming, oil emulsification, and other faults. In severe cases, it can cause equipment to shut down s

  READ MORE
• 
  What effect does humidity have on the life of the

  26-02-27

  High humidity can significantly shorten the lifespan of ZQA350-12.64 gearbox, with the core being accelerated damage through three paths: lubrication failure, metal corrosion, and seal degradation. In long-term high humidity environments, the lifespan may drop to less than one-third of the design value. 1、 Humidity tolerance benchmark for ZQA350-12.64 Standard applicable: Relative humidity ≤ 8

  READ MORE
• 
  How to determine the peak impact torque of the red

  26-02-26

  The peak impact torque of the gearbox can be accurately determined through a three-step process of operating condition analysis, parameter calculation, and safety factor correction. The core is to identify instantaneous load changes during equipment operation and match them with the dynamic load capacity of the gearbox. The following are specific judgment methods: 1、 Clearly identify the source

  READ MORE
• 
  BL3-17-7.5KW cycloidal pinwheel reducer output sha

  26-02-26

  The keyway standard for the output shaft of BL3-17-7.5KW cycloidal pinwheel reducer is mainly designed based on the shaft diameter size, torque transmission requirements, and the national standard GB/T 1095-2003 "Sectional Dimensions of Flat Key Keyways". Flat key connections are usually used to balance torque transmission and assembly convenience. 1、 Core parameters of output shaft keyway (inf

  READ MORE

CATEGORIES