Industry-news

• 
  Guide to avoiding pitfalls throughout the entire p

  26-07-13

  1、 Selection stage: precise matching, rejecting "empiricism" Selection is the first hurdle in the application of wire drawing machine reducers, and it is important to avoid blindly making decisions based solely on motor power. The following core dimensions must be comprehensively considered: 1. Deep calculation of torque and load characteristics The most common mistake beginners make is t

  READ MORE
• 
  Application of precision planetary reducer in high

  26-07-13

  1. Coping with high-frequency impacts to ensure consistency in wire size During the process of micro wire drawing, the wire undergoes large fluctuations in drawing force and strong instantaneous impact. The precision planetary reducer adopts a distributed load design with 3-6 sets of planetary gears synchronously meshing, which greatly improves the load-bearing capacity compared to traditional

  READ MORE
• 
  Gear reducer vs cycloidal pinwheel reducer: How to

  26-07-11

  1、 Core Performance Comparison: Gear Reducer vs Cycloid Needle Wheel Reducer 1. Transmission principle and impact resistance Gear reducer: Based on the traditional gear meshing principle, reduction is achieved through the combination of large and small gears. Its structure is relatively simple, and maintenance and repair are relatively convenient. Cycloid pinwheel reducer: It adopts a spe

  READ MORE
• 
  Special requirements for the reducer of the surfac

  26-07-11

  1. Extremely high requirements for backlash control and positioning accuracy The rewinding machine requires fast, smooth, and accurate positioning of paper during operation to ensure precise winding length and flat end face. Therefore, the gearbox must have extremely low backlash (return clearance). When the device switches between forward and reverse directions or frequently starts and stops,

  READ MORE
• 
  Key points for selecting reducer for external grin

  26-07-09

  Torque is the key to measuring the load-bearing capacity of a gearbox. When selecting, it is not enough to only consider the motor power, but must be calculated based on the actual load torque, and sufficient safety factors must be reserved. Calculation and matching: It is necessary to combine the rated torque of the motor with the reduction ratio to ensure that the theoretical output torque is

  READ MORE
• 
  Complete steps for dismantling and repairing the g

  26-07-09

  1、 Preparation and safety isolation before maintenance Safety isolation: Cut off the power supply and hang warning signs, strictly implement the "LOTO" system to ensure safe operation. Reference materials: Refer to the disassembly manual of this model reducer to clarify special design, assembly requirements, and various tolerance standards. Tool preparation: Prepare specialized wrenches,

  READ MORE
• 
  Troubleshooting of abnormal noise from rotary kiln

  26-07-08

  1. Uniform slight buzzing sound: normal operating conditions. The gearbox operates with only a smooth and low humming sound, without any noise or vibration, which belongs to the normal meshing transmission sound of gears. The equipment is in good working condition and does not require any treatment. 2. Harsh metal friction sound: Insufficient lubrication or gear wear. Sharp and piercing frictio

  READ MORE
• 
  Are the gears of the rotary kiln reducer worn or c

  26-07-08

  1、 The core causes of gear wear and pitting corrosion 1. Lubrication failure: Insufficient lubricating oil, poor oil quality, and inconsistent oil type lead to increased gear meshing friction, long-term dry wear causing wear and pitting; 2. Overload operation: Long term overload, excessive instantaneous impact load, exceeding the gear bearing limit, causing fatigue damage to the tooth surfac

  READ MORE
• 
  Key points for selecting reducers for chemical mix

  26-07-07

  The working conditions of mixers in the chemical industry are special, with multiple high viscosity materials, acid and alkali corrosion, continuous and uninterrupted operation, explosion-proof and other special requirements. The performance, material and stability requirements of reducers are much higher than those of ordinary civilian mixing equipment. Choosing the wrong reducer not only results

  READ MORE

CATEGORIES